Aim was to put the new one back in but we could not get the cam pin out so he has taken it home with him tonight and will remove it hopefully...
Here are a few photos
Cam out and caps off
Shot of the springs and hydraulic lifter
Rocker that was replaced, the wear is quiet bad and a deep groove is aross the face of the rocker
Here are the fauly cam and rocker, you can sort of see the groove on the rocker a bit better. These cams have done probally 250klm max since new
Close up of the damaged lobe, on the right you can see the lip that has developed.
Trying to get the cam pin out to no avail, we heated the cam to try and loosen.
Installing the rocker arm stoppers for good measure
Close up of the rocker arm stoppers
hopefully we will finish it off tomorrow and crank her up, fingers crossed everthing is ok
No comments:
Post a Comment